Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mazda
  4. :
  5. Mazda 5
  6. : Headlight bulb

Mazda 5 - Headlight bulb

Mazda 5 (2005-2015 / MK 1)
How to replace the front headlight bulb of the Mazda 5

If the headlight bulb of your Mazda 5 has suddenly stopped working and you want to find out how to correctly replace it, then all you have to do is read the …read all…
Posted on 20 April 2024 by ScegliAuto
Mazda 5 (2005-2015 / MK 1)
Removing the Mazda 5 headlight bulb

In this short and simple video we will see how to remove and replace the headlight bulb of the Mazda 5 first series, following the instructions below. First we …read all…
Posted on 21 August 2022 by ScegliAuto

Shock absorbers (1) Car stereo (2) Battery (1) Gearbox (1) Spark plugs (1) Key (4) Timing belt (1) Checks and maintenance (1) Particulate filter (1) Air filter (1) Cabin air filter (3) Accessory Kit (3) Headlight bulb (2) Engine oil (3) Door panel (2) Fuse box (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos