Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 5
    4. : Cabin air filter

Mazda 5 - Cabin air filter

Mazda 5 (2005-2015 / MK 1)
How to replace the cabin filter on a Mazda 5.
In this video tutorial we can see how it is possible to replace the cabin filter on a Mazda 5, following a few simple steps that will guide you towards proper …read all…
Posted on 19 April 2023 by ScegliAuto
Mazda 5 (2005-2015 / MK 1)
Replacement of the car cabin air filter
Replacing the pollen filter of your car is a very important operation because it defends against external agents that enter the passenger compartment while …read all…
Posted on 26 July 2023 by ScegliAuto
Mazda 5 (2005-2015 / MK 1)
Cabin air filter replacement
The passenger compartment air filter is located behind the central tunnel: access from the passenger side and remove the plastic side cover and the …read all…
Posted on 14 July 2023 by ScegliAuto
Shock absorbers (1) Car stereo (2) Battery (1) Gearbox (1) Spark plugs (1) Key (4) Timing belt (1) Checks and maintenance (1) Particulate filter (1) Air filter (1) Cabin air filter (3) Accessory Kit (3) Headlight bulb (2) Engine oil (3) Door panel (2) Fuse box (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos