Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mazda
  4. :
  5. Mazda 5
  6. : Car stereo

Mazda 5 - Car stereo

Mazda 5 (2005-2015 / MK 1)
How to disassemble the car stereo of a Mazda 5

Before we can start, we will have to go and sit on the driver's seat of our Mazda 5. Let's start by unscrewing and removing the gear knob, then disengaging and …read all…
Posted on 8 February 2024 by ScegliAuto
Mazda 5 (2005-2015 / MK 1)
Dashboard and central tunnel removal on Mazda 5

Using a plastic wedge (not iron!) Or a small flat screwdriver, lift the plastic near the handbrake and remove it, remembering to disconnect the connector. In …read all…
Posted on 4 January 2024 by ScegliAuto

Shock absorbers (1) Car stereo (2) Battery (1) Gearbox (1) Spark plugs (1) Key (4) Timing belt (1) Checks and maintenance (1) Particulate filter (1) Air filter (1) Cabin air filter (3) Accessory Kit (3) Headlight bulb (2) Engine oil (3) Door panel (2) Fuse box (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos