Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 5
    4. : Accessory Kit

Mazda 5 - Accessory Kit

Mazda 5 (2005-2015 / MK 1)
Installation of cameras in rear-view mirrors
For better rear visibility, especially dead center, cameras can be installed in the rear view mirrors. For this operation it is necessary to obtain the camera …read all…
Posted on 18 July 2023 by ScegliAuto
Mazda 5 (2005-2015 / MK 1)
Satellite navigator kit installation
The tools needed for this series of operations are special tools, partly made of plastic, available in spare parts stores. Obtain the necessary kit suitable …read all…
Posted on 18 July 2023 by ScegliAuto
Mazda 5 (2005-2015 / MK 1)
Installation of input adapter to AUX IN
In order to install an Aux in input to the original car radio, it must be removed in order to connect the interface control unit and the cable. Start by …read all…
Posted on 15 July 2023 by ScegliAuto
Shock absorbers (1) Car stereo (2) Battery (1) Gearbox (1) Spark plugs (1) Key (4) Timing belt (1) Checks and maintenance (1) Particulate filter (1) Air filter (1) Cabin air filter (3) Accessory Kit (3) Headlight bulb (2) Engine oil (3) Door panel (2) Fuse box (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos