Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Cameras in Wing Mirrors

Model: Mazda 5 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Accessory kit

Video tutorial

For better rear visibility, especially in blind spots, you can install cameras in the wing mirrors. For this operation, you need to obtain the camera kit and the specific control unit for the vehicle in question.

For safety, start by disconnecting the negative terminal of the battery. Next, carefully remove the door panel, taking care with the various internal wiring that needs to be removed.

Behind the plastic cover are the three screws securing the mirror that need to be removed. Disconnect the wire by acting on the connector and remove the mirror.

Following the instructions included with the kit, secure the camera by routing the cables through the designated conduit connecting the door to the bodywork. Once all necessary connections are made, perform a test.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Mazda 5 (2005-2015 / MK 1) Lift the car on the ramp to access the relevant components. The necessary tools are a ratchet spanner, a set of fixed spanners, a special tool for re…
Installation of AUX IN Adapter
Installation of AUX IN Adapter
Mazda 5 (2005-2015 / MK 1) To install an AUX IN input to the original car radio, you need to remove it to connect the interface control unit and the cable. Start by removing th…
Installation of Satellite Navigation Kit
Installation of Satellite Navigation Kit
Mazda 5 (2005-2015 / MK 1) The tools needed for this series of operations are specific tools, partly plastic, available at spare parts shops. Obtain the necessary kit suitable …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos