Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Satellite Navigation Kit

Model: Mazda 5 MK 1 - Years 2005-2015
Part: Accessory kit

The tools needed for this series of operations are specific tools, partly plastic, available at spare parts shops. Obtain the necessary kit suitable for the vehicle and begin by removing the gear cover and the corresponding plastic panel by prying at the edges with the tool. Disconnect the wiring of the switches and pull it away from the gear lever. Gently remove the console frame by prying on all sides, and then also remove the complete dashboard with air vents by carefully extracting it from its housing. Remove the screws on the sides of the radio to extract it from the dashboard, disconnect all wiring from the back until it is completely removed. Carefully follow the instructions included with the kit to connect the power supplies as per the diagram included with the navigation kit, the antenna, and the microphone. Refit the new console equipped with radio and navigation and perform a functionality test.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installation of Cameras in Wing Mirrors
Installation of Cameras in Wing Mirrors
Mazda 5 (2005-2015 / MK 1) For better rear visibility, especially in blind spots, you can install cameras in the wing mirrors. For this operation, you need to obtain the camera…
Installation of AUX IN Adapter
Installation of AUX IN Adapter
Mazda 5 (2005-2015 / MK 1) To install an AUX IN input to the original car radio, you need to remove it to connect the interface control unit and the cable. Start by removing th…
How to Remove the Door Panel of the Mazda 5?
How to Remove the Door Panel of the Mazda 5?
Mazda 5 (2005-2015 / MK 1) To remove the door panel of the Mazda 5, start by unfastening the clips securing the plastic cover of the pillar. Next, detach the plastic cover arou…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos