Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 5
    4. : Engine oil

Mazda 5 - Engine oil

Mazda 5 (2005-2015 / MK 1)
Engine oil and oil filter replacement
To change the engine oil and the relative filter, place the car on suitable car platforms to facilitate access to the oil pan; unscrew the sump drain plug …read all…
Posted on 25 July 2023 by ScegliAuto
Mazda 5 (2005-2015 / MK 1)
Engine oil and oil filter replacement
Lift the machine on the bridge to access the affected parts. The necessary tools are a ratchet wrench, a set of fixed wrenches, a special tool to disassemble …read all…
Posted on 16 July 2023 by ScegliAuto
Mazda 5 (2005-2015 / MK 1)
Engine oil and oil filter replacement
Place wedges under the rear wheels and jack up the front part by placing it in the center. Remove the stone guard to access the oil pan: place a pan of …read all…
Posted on 14 July 2023 by ScegliAuto
Shock absorbers (1) Car stereo (2) Battery (1) Gearbox (1) Spark plugs (1) Key (4) Timing belt (1) Checks and maintenance (1) Particulate filter (1) Air filter (1) Cabin air filter (3) Accessory Kit (3) Headlight bulb (2) Engine oil (3) Door panel (2) Fuse box (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos