Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Engine Oil and Oil Filter

Model: Mazda 5 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Engine oil

Video tutorial

To replace the engine oil and the corresponding filter, position the vehicle on suitable car ramps to facilitate access to the oil sump; unscrew the drain plug at the rear of the sump and collect the used oil in a suitable container. Once the draining is complete, re-screw the plug.

Next, proceed to remove the filter located just in front of the oil sump; then apply the new filter after coating the gasket with oil and do not exceed the tightening torque. Finally, fill the engine with new oil according to the SAE specifications and the quantities indicated in the user and maintenance manual.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Mazda 5 (2005-2015 / MK 1) Lift the car on the ramp to access the relevant components. The necessary tools are a ratchet spanner, a set of fixed spanners, a special tool for re…
Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Mazda 5 (2005-2015 / MK 1) Place chocks under the rear wheels and lift the front with a jack positioned at the centre. Remove the splash guard to access the oil sump: place a s…
How to Reset the Engine Oil Light in a Mazda 5
How to Reset the Engine Oil Light in a Mazda 5
Mazda 5 (2005-2015 / MK 1) To reset the engine oil light on a Mazda 5, enter the vehicle and turn the ignition to the ON position without starting the engine. Use the buttons o…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos