Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Light in a Mazda 5

Model: Mazda 5 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

Video tutorial

To reset the engine oil light on a Mazda 5, enter the vehicle and turn the ignition to the ON position without starting the engine. Use the buttons on the dashboard or steering wheel to access the onboard computer menu and scroll through the various options until you find the 'Maintenance' or 'Settings' section.

Locate the option related to the engine oil or oil change interval. Select this option and choose the reset or clear option.

Hold down the confirmation button for a few seconds until the display shows a message indicating that the reset is complete. In some cases, you may need to confirm the operation a second time.

After completing the procedure, turn off the instrument cluster, wait a few seconds, and turn it back on to verify that the oil light has been effectively removed from the display and that the system has recorded the new maintenance interval.


Posted on 27 March 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Mazda 5 (2005-2015 / MK 1) Lift the car on the ramp to access the relevant components. The necessary tools are a ratchet spanner, a set of fixed spanners, a special tool for re…
Replacing Engine Oil and Oil Filter
Replacing Engine Oil and Oil Filter
Mazda 5 (2005-2015 / MK 1) To replace the engine oil and the corresponding filter, position the vehicle on suitable car ramps to facilitate access to the oil sump; unscrew the …
Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Mazda 5 (2005-2015 / MK 1) Place chocks under the rear wheels and lift the front with a jack positioned at the centre. Remove the splash guard to access the oil sump: place a s…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos