Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 5
    4. : Engine oil and oil filter replacement

Mazda 5 - Video tutorial

Model: Mazda 5 MK 1 - Years 2005-2015
Part: Engine oil
Operation: Engine oil and oil filter replacement

Place wedges under the rear wheels and jack up the front part by placing it in the center. Remove the stone guard to access the oil pan: place a pan of suitable capacity under the drain plug (located at the rear) and unscrew it to allow the exhausted oil to drain out; screw it back on after emptying. The filter cartridge is located in front of the oil pan: unscrew it and replace it with the new one after having sprinkled the gasket with oil to improve its adhesion. Finally fill the engine with new oil according to the quantities and SAE specifications indicated in the use and maintenance manual after having lowered the car to check the level. Also check the level of other liquids.


Posted on 14 July 2023 by ScegliAuto



Engine oil and oil filter replacement
Mazda 5 (2005-2015 / MK 1) Lift the machine on the bridge to access the affected parts. The necessary tools are a ratchet wrench, a set of fixed wrenches, a special tool to dis
Engine oil and oil filter replacement
Mazda 5 (2005-2015 / MK 1) To change the engine oil and the relative filter, place the car on suitable car platforms to facilitate access to the oil pan; unscrew the sump drain
How to replace the air filter on the Mazda 5 2008
Mazda 5 (2005-2015 / MK 1) In this new guide of ours dedicated to all of you owners of a 2008 Mazda 5, we will describe step by step all the various steps necessary to be able

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos