Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Mazda 5 - Key

Mazda 5 (2005-2015 / MK 1)
How to replace the battery of the Mazda 5 remote control
If the remote control of your Mazda 5 has suddenly stopped working and you want to find out how to replace the battery located inside it yourself, then you are …read all…
Posted on 6 March 2024 by ScegliAuto
Mazda 5 (2005-2015 / MK 1)
How to replace mazda 5 key battery
To complete the replacement of the button cell battery inside the key of your Mazda 5 (year 2005-2015) yourself, just read the following guide carefully and …read all…
Posted on 12 May 2023 by ScegliAuto
Mazda 5 (2005-2015 / MK 1)
Battery replacement on Mazda 5 key
By pressing the appropriate button, release the spare manual key. At this point you will have access to the slot of the door on the key case: therefore, as you …read all…
Posted on 31 January 2024 by ScegliAuto
Mazda 5 (2005-2015 / MK 1)
How to change the Mazda 5 remote control battery
The procedure described in the video is the same for Mazda 3,4 5 and 6 models. Required: small pointed tool and small flat screwdriver. The battery to be used …read all…
Posted on 16 December 2023 by ScegliAuto
Shock absorbers (1) Car stereo (2) Battery (1) Gearbox (1) Spark plugs (1) Key (4) Timing belt (1) Checks and maintenance (1) Particulate filter (1) Air filter (1) Cabin air filter (3) Accessory Kit (3) Headlight bulb (2) Engine oil (3) Door panel (2) Fuse box (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos