Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 5
    4. : How to replace the battery of the Mazda 5 remote control

Mazda 5 - Video tutorial

Model: Mazda 5 MK 1 - Years 2005-2015
Part: Key
Operation: How to replace the battery of the Mazda 5 remote control

If the remote control of your Mazda 5 has suddenly stopped working and you want to find out how to replace the battery located inside it yourself, then you are in the right place. Below we will describe all the necessary steps to complete the operation. First of all, release the emergency key by pressing the appropriate button located on the cover, then remove the cover using a common flat-head screwdriver. Finally, locate the exhausted battery and remove it. Insert the new battery and reassemble the back cover correctly.


Posted on 6 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos