Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery in a Mazda 5 Key

Model: Mazda 5 MK 1 - Years 2005-2015
Part: Key

Press the designated button to release the manual spare key. You will now have access to the slot of the cover on the key fob: as shown in the video, lever in this slot using a small flathead screwdriver to remove the cover. Here is the battery! It is a CR1620 and can be easily found in hardware stores or large supermarkets. Using the small flathead screwdriver again, remove the battery from its holder and insert the new one you purchased. Close the cover, and you're done. Good luck!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery in the Mazda 5
How to Replace the Key Battery in the Mazda 5
Mazda 5 (2005-2015 / MK 1) To independently replace the button battery inside your Mazda 5 key (2005-2015), carefully read the following guide and follow the steps described. F…
Can a Mazda 5 remote be programmed after replacing the battery?
Can a Mazda 5 remote be programmed after replacing the battery?
Mazda 5 (2005-2015 / MK 1) To the question of whether it is possible to independently program a remote key for a Mazda 5 car, the answer is yes. The video tutorial here is valu…
Replacing the Timing Belt on a Mazda 2
Replacing the Timing Belt on a Mazda 2
Mazda 5 (2005-2015 / MK 1) This guide will illustrate the main steps for removing and replacing the timing belt on a Mazda 2. First, open the bonnet of the vehicle and begin by…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos