Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Mazda BT-50

Model: Mazda Bt 50 - Years 2011-2023
Part: Service warning light

Let's see how to reset the service light on a Mazda BT-50: the vehicle must be off. Press the brake pedal and the accelerator at the same time; keep both pedals pressed, turn the key to the "ON" position (without starting the engine), and continue holding the pedals. After a few seconds (usually 10/15), the service light will start to flash. This is the signal to release the pedals and turn off the ignition. Done: the reset is complete, and at the next start, the service light should no longer appear until the next maintenance interval.

Posted on 22 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Mazda BT50
Mazda Bt 50 (2011-2023 / UR, UP) The service light on a Mazda BT50 vehicle turns on when it is necessary to perform a car service. After performing the service, which includes replac…
How to Reset the Service Light on Mazda BT-50
How to Reset the Service Light on Mazda BT-50
Mazda Bt 50 (2011-2023 / UR, UP) In this tutorial video, you will see how to reset the service light on a Mazda BT-50. First, perform maintenance on the vehicle, such as changing the…
How to reset the service of the Mazda BT50 (and Ford Ranger)
How to reset the service of the Mazda BT50 (and Ford Ranger)
Mazda Bt 50 (2011-2023 / UR, UP) .. In this video, we will see how to reset the service light on the Mazda BT-50 pick-up truck. The same procedure is also valid for.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos