Do it yourself
| ||||
|
Mazda 3 - Video tutorial
Model: Mazda 3
BK, MK 1
- Years 2003-2009 The alternator is an absolutely fundamental element for the correct functioning of all electrical and electronic devices on board the car. It is located in the front left part of the engine (looking at it from the front) and is driven by the auxiliary belt: it is preferable to disconnect the battery poles before disassembling it. Once intercepted, loosen the auxiliary belt tensioner and free the pulleys; unscrew the fixing nuts of the cables connected to the alternator (it is advisable to remove the engine casing and access it from below), disconnect the socket, disassemble the fixing pins of the alternator and remove it from its seat. Then apply the new alternator (it is possible to buy excellent remanufactured products in the after market) and reassemble everything.
Posted on 13 July 2023 by ScegliAuto
Alternator replacement instructions
Mazda 3 (2003-2009 / BK, MK 1) When the alternator is damaged it is no longer able to recharge the battery and the warning light indicating the battery symbol remains on on the ins
Filter on positive alternator
Mazda 3 (2003-2009 / BK, MK 1) Among the most complicated technical drawbacks we can certainly include the annoying hums and various interference caused by the car's electrical dev
Battery replacement instructions
Mazda 3 (2003-2009 / BK, MK 1) The battery is located in the engine compartment, just behind the air filter container. Before proceeding with the replacement, make sure of the corr Other guides that may interest you
|
How to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.061
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |