Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Brake Discs and Pads

Model: Mazda Mx 5 NB, MK 2 - Years 1998-2005
Part: Brake rotors

Lift the vehicle with a jack and apply axle stands to securely support it during the repair. Remove the front wheel (loosen the bolts before lifting), unscrew the bolts securing the brake caliper bracket, and remove the disc; separate the brake caliper from the bracket by removing the pads and retract the caliper piston using a C-clamp. Fit the new disc after cleaning it of any oil residue, reassemble the bracket with the new pads, and then the brake caliper; repeat the process on the other wheel. Pay attention during the initial braking.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Brake Pads
Replacing Front Brake Pads
Mazda Mx 5 (1998-2005 / NB, MK 2) When replacing the front brake pads, first open the bonnet and unscrew or remove the cap from the brake fluid reservoir. Loosen the wheel nuts. Now l…
Replacement of Front Speakers
Replacement of Front Speakers
Mazda Mx 5 (2005-2015 / MK 3, NC) Lower the door window and remove the screw located in the handle opening area. Unscrew the various screws located on the sides. Use a plastic tool to…
Replacement of Front Headlamp Projector
Replacement of Front Headlamp Projector
Mazda Mx 5 (1989-1997 / MK 1) Due to aging and weather conditions, headlamps tend to yellow and need to be replaced. To replace the front headlamp, open the bonnet and position th…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos