Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Air Filter Replacement

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Air filter

Open the bonnet and locate the filter container in the air box on the right side of the engine. Release the clips on the cover by lifting them upwards, then carefully remove the container by pulling it upwards and disengaging it from the support. Remove the old filter and insert a new one. Before inserting the new filter, clean the interior of any dust deposits. Carefully close the air box, ensuring it fits perfectly with the cover. Reposition it accurately and ensure the clips are securely fastened. Start the engine and check for proper operation.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Engine Air Filter
Replacement of Engine Air Filter
Mazda 3 (2003-2009 / BK, MK 1) The engine air filter housing is located at the front right (when facing the vehicle), beneath the air duct: unscrew the side fixing screw of the duc…
Replacement of the Engine Air Filter
Replacement of the Engine Air Filter
Mazda 3 (2003-2009 / BK, MK 1) Open the bonnet and locate the filter housing in the air box on the right side of the engine. Release the springs attached to the cover by lifting th…
Cabin Air Filter Replacement
Cabin Air Filter Replacement
Mazda 3 (2009-2013 / MK 2, BL) It is very important to change the cabin air filter as it protects us from external agents and allows the car's ventilation duct to breathe better. I…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos