Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs of the Mazda CX-5

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Spark plugs

Let's discover in this short and simple guide how to remove and replace the engine spark plugs of the Mazda CX-5. First, open the bonnet of your car and start by removing the upper engine cover; then disconnect the electrical connectors or the leads of the spark plugs and use a socket wrench with an extension to unscrew and remove them, as shown in the video. At this point, replace the spark plugs with new ones of the same heat rating; screw them in by hand and then tighten with the wrench, following the video tutorial to the end!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) To replace the spark plugs on a Mazda CX-5, open the bonnet to access the components inside the engine bay. First, detach the plastic cover from the …
How to Replace the Interior Light Bulb in a Mazda CX-5?
How to Replace the Interior Light Bulb in a Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) To replace the interior light bulb in a Mazda CX-5, use a flat object as a lever to detach the light fitting located behind the rear-view mirror. Onc…
How to Replace the Rear Light Bulb on the Mazda CX-5?
How to Replace the Rear Light Bulb on the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) To replace the rear light bulb on the Mazda CX-5, open the tailgate of the boot and detach the side cover corresponding to the bulb that needs replac…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos