Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 6
    4. : Replacement of pads and front brake discs

Mazda 6 - Video tutorial

Model: Mazda 6 GG, MK 1 - Years 2002-2008
Part: Brake pads
Operation: Replacement of pads and front brake discs

Raise the car on suitable car stands and remove the front wheel; then unscrew the fixing pins of the brake caliper support in order to have the possibility to remove the disc; then proceed with the disassembly of the disc fixing pin and remove it from the hub; retract the brake caliper piston using an arc clamp or a simple parrot wrench; insert the new pads in the caliper, apply the new disc to the hub and refit the brake caliper. Pay attention to the first braking in order to run in the new brake disc-brake pad coupling.


Posted on 28 July 2023 by ScegliAuto



Replacement discs and rear pads
Mazda 6 (2008-2012 / GH, MK 2) Once the car has been raised and the rear wheels removed, remove the brake caliper from its support, remove the old pads and disassemble the support
Replacement discs and rear pads
Mazda 6 (2002-2008 / GG, MK 1) Raise the car on the bridge and remove the rear wheel; proceed with disassembling the brake caliper fixing pins to remove it from its seat, remove th
Replacing the rear brake pads
Mazda 6 (2002-2008 / GG, MK 1) Collect the original spare discs then lift the car making it safe and remove the wheel. Open the cap of the brake fluid reservoir Then remove the cal

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos