Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Mazda CX-9

Model: Mazda Cx 9 TB - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Engine oil

See other generations:
Video tutorial

In this video tutorial, you can see how to change the engine oil in a Mazda CX-9. The oil required for the change is SAE 5W-20. First, lift the vehicle using a hydraulic jack and place safety jack stands. Next, unscrew the oil filler cap from the engine compartment and pull up the dipstick; go under the vehicle and locate the oil drain plug and the filter.

Unscrew the oil drain plug and let all the oil drain into a pan; then replace the plug and tighten it well; next, unscrew the filter and replace it with a new one. Lower the vehicle and add new SAE 5W-20 oil.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Replace Engine Oil and Oil Filter on Mazda CX-9
How to Replace Engine Oil and Oil Filter on Mazda CX-9
Mazda Cx 9 (2016-2024 / TC) This guide explains how to perform routine maintenance by replacing the engine oil and oil filter on the Mazda CX-9. First, lift the vehicle and remo…
How to Reset the Oil Light on a Mazda CX-9
How to Reset the Oil Light on a Mazda CX-9
Mazda Cx 9 (2016-2024 / TC) The procedure to manually reset the oil light on your Mazda CX-9 second generation (2016-2023) is practically identical to that used in other Mazda C…
How to Reset the Oil Service Light on a Mazda CX-9?
How to Reset the Oil Service Light on a Mazda CX-9?
Mazda Cx 9 (2016-2024 / TC) Resetting the oil service light on a Mazda CX-9, as shown in this tutorial, is an extremely simple task. Before proceeding, ensure you have completed…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos