Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Mazda CX-3

Model: Mazda Cx 3 MK 1 - Years 2015-2023
Part: Service warning light

If you notice the orange light with a spanner icon appearing when you start your Mazda CX-3, don't worry as it is simply a reminder to inform you that a service is due. Below, we will discover how to manually reset the light. First, start the instrument cluster and the central display of the infotainment system. Then, click on the "Applications" icon and subsequently on "Vehicle status monitor". At this point, select "Maintenance" and click on "Reset". Confirm the operation and a few moments later, you are done.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Mazda Cx 3 (2015-2023 / MK 1) To reset the maintenance light on a Mazda CX-3, the procedure is simple and is done through the instrument cluster display and the central joystick. …
Mazda Cx 3 (2015-2023 / MK 1) This tutorial shows how to reset the on-board computer in a Mazda CX-3, a very simple and quick operation, for example, as a troubleshooting attempt …
Mazda Cx 3 (2015-2023 / MK 1) .. In this tutorial, we can see how to reset the service light on a Mazda CX-3, an extremely simple and quick operation to perform only.. …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos