Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mazda
  4. :
  5. 6
  6. : How to replace the pollen filter on Mazda 6

Mazda 6 - Video tutorial

Model: Mazda 6 MK 1, GG - Years 2002-2008
Part: Cabin air filter
Operation: How to replace the pollen filter on Mazda 6

In this video tutorial we can see how it is possible to replace the pollen filter on a Mazda 6 by following a few simple steps. The first thing to do is to buy a new pollen filter; second step you have to get on board the car and turn off the car and pull the handbrake. The pollen filter on this car is located behind the glovebox, so you have to remove all the material that is inside, then you have to press the sides of the drawer inwards and lower the glovebox. Once lowered we can see the pollen filter box, at this point we must remove the lid of the box and remove the old filter and place the new pollen filter following the indications of the arrow present in the filter itself.


Posted on 28 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos