Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Blades on a Mazda CX-5

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Windshield wipers

This guide shows how to replace the wiper blades on a Mazda CX-5 Mk1. No special tools are required for the replacement, apart from the correct set of wiper blades for your selected car model; this information can be found in the owner's manual or on the wiper arm. Lift the wiper arm, then disengage the lock by lifting it; you can use a small screwdriver or a lever for this operation. Slide the blade downwards and remove it from the holder. Replace it with the new blade and secure it in position. Lower the wiper arm to complete the operation.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Blades on a Mazda CX-5?
How to Replace the Wiper Blades on a Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) To replace the wiper blades on a Mazda CX-5, press the joint between the blade and its arm. Once this part is pressed, slide the blade out by pulling…
How to Replace the Wiper Blades on a Mazda CX-5
How to Replace the Wiper Blades on a Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) To replace the wiper blades on a Mazda CX-5, lift the arms so that the blades do not touch the ground. Once lifted, position them perpendicularly to …
Replacing the Rear Wiper Blade of the Mazda CX-5
Replacing the Rear Wiper Blade of the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) Today, in this video tutorial, see how to remove and replace the rear wiper blade of the Mazda CX-5. First, move to the back of your car and start by…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos