Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Wiper Blades on a Mazda CX-5

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Windshield wipers

To replace the wiper blades on a Mazda CX-5, lift the arms so that the blades do not touch the ground. Once lifted, position them perpendicularly to the arm to disengage the pins and completely remove the old blades. At this point, insert the new blades onto the arm, repeating the same operation on the other side. When correctly attached, position them on the windscreen and check that they function properly.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Mazda CX-5 (2012-2017 / MK 1, KE) .. This guide shows how to replace the wiper blades on a Mazda CX-5 Mk1. No special tools are required for the replacement,.. …
Mazda CX-5 (2012-2017 / MK 1, KE) To change the rear wiper blade, start by removing the cover that conceals the nut of the rear wiper arm. Now, lift the arm and the wiper blade, rotat…
Mazda CX-5 (2012-2017 / MK 1, KE) Today, let's go through the steps necessary to remove and replace the rear wiper blade on the Mazda CX-5. First, move to the rear and start by removi…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos