Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset TPMS on Mazda 3?

Model: Mazda 3 BP, MK 4 - Years 2019-2026
Part: Tire pressure warning light

When the low tire pressure warning light on the instrument panel comes on, we must proceed to check the pressures of all four tires and, if necessary, proceed to restore the minimum pressure envisaged by the manufacturer. After having carried out these operations it will be necessary to proceed with resetting the warning light which came on on the panel. To do this we can follow the instructions below: access the driver's seat and turn on the ignition, press the control on the left side of the steering wheel and move around the menu until you select "vehicle status" and then select " restore tire pressure and give consent with the ok key.In this way, the low pressure indication on the display will switch off.

Posted on 20 January 2023 by ScegliAuto

This video is currently unavailable

Related tutorials

How to reset the tire pressure warning light on the Mazda 3
How to reset the tire pressure warning light on the Mazda 3
Mazda 3 (2013-2019 / MK 3, BM, BN) The tire pressure warning light indicates a possible loss of pressure or puncture in one or more tires; let's see how to reset the TPMS sensors on th…
Resetting the TPMS light on a Mazda 3.
Resetting the TPMS light on a Mazda 3.
Mazda 3 (2009-2013 / MK 2, BL) In this very short video guide today, we are shown the entire procedure necessary to reset the tire pressure warning light, also known as the TPMS li…
How to reset the TPMS light on the MAZDA 3
How to reset the TPMS light on the MAZDA 3
Mazda 3 (2013-2019 / MK 3, BM, BN) When the TPMS light comes on in the MAZDA 3, it is necessary to proceed with checking the pressure of all four tires. After adjusting the pressure if…

Other guides you may be interested in

How to Replace the Diesel Filter on a Dacia Duster

Let's see how to replace the diesel filter on a Dacia Duster. Start by removing the plastic cover at the bottom of the bumper with a suitable screwdriver (remove the circle), then reach the front headlamp located in the bumper (as shown in the video). After removing the container, take out the filter inside and fit a new one (same size). Refit the container and the plastic cover under the car's bumper with the attached clips. Test the proper functioning. Refit the front circle with the securing clips and lower the car.

Watch the video!


by ScegliAuto

More videos