Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Number Plate Bulbs

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: License plate light

Replacing the number plate bulbs is very simple and does not require removing any trim. Open the rear bonnet to access the bulb holder more easily. Pry along both sides of the transparent cover of the bulb holder to detach it and access the bulb. Extract the old bulb (T10 fitting) and insert the new one, then reposition the transparent protective cover. If you notice a significant difference in brightness between the new bulb and the other, it is advisable to replace the latter as well.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Climate Control Bulb
Replacing the Climate Control Bulb
Mazda Cx 7 (2006-2012 / MK 1) If the climate control buttons on the console do not light up when the lights are turned on, the backlight bulb has blown: to replace it, you need to…
Replacing the Rear Brake Light Bulb
Replacing the Rear Brake Light Bulb
Mazda Cx 7 (2006-2012 / MK 1) To replace the brake bulb in the rear light, you do not need to remove the light unit as you can access the back of the light by opening the boot. Re…
Replacing Rear Headlamp Bulbs
Replacing Rear Headlamp Bulbs
Mazda Cx 7 (2006-2012 / MK 1) Replacing the rear headlamp bulbs is very simple as it is not necessary to remove the headlamp; you can access the bulb holder from the boot by remov…

How to Replace Windshield Wiper Blades on BMW 5 Series E90

Keeping your windshield wiper blades efficient is essential for safe driving in both rain and for proper cleaning when activating the washer: for this reason, fill the reservoir with a quality cleaner, not just water. Replacing the blades on this model is simple thanks to the innovative attachment system: just lift the arm, press the two side tabs of the blade to slide it forward enough, then press the central lock to complete the removal. Finally, insert the new blade by sliding it until it locks into place.

Watch the video!


by ScegliAuto

More videos