Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change on a 2019 Mazda 2

Model: Mazda 2 MK 3, DJ - Years 2014-2023
Part: Warning light – error code

In this video tutorial, you can see how to reset the oil change on a 2019 Mazda 2 by following a few simple steps: the first thing to do is the vehicle maintenance, such as changing the engine oil and filters. After performing the DIY maintenance, get in the vehicle, insert the key, and start the vehicle; now you will see the spanner light illuminated. Use the controls on the central console as shown in the video, then press the Home button to access the settings menu, scroll through the menu using the knob, then select "Applications" and press the knob, then select "Vehicle status monitor" and press the knob again, then press "maintenance" and subsequently press "Oil change", now press RESET, it will then ask if you want to perform the reset, so confirm the reset.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Service reset on a Mazda 2
Service reset on a Mazda 2
Mazda 2 (2014-2023 / MK 3, DJ) In this very short guide, we will see how to reset the service light using the central navigation display of a Mazda 2, third series model produced f…
How to Reset the Maintenance Light on a Mazda 2
How to Reset the Maintenance Light on a Mazda 2
Mazda 2 (2014-2023 / MK 3, DJ) In this brief guide, follow the procedure to reset the maintenance light on a Mazda 2, third generation model produced from 2014 to 2022. Start by tu…
How to reset the service light on the Mazda 2
How to reset the service light on the Mazda 2
Mazda 2 (2002-2007 / DY, MK 1) Today we will explain how to reset the service light related to the oil change on a Mazda 2 MK 1 model vehicle. To reset the light, we need to get in…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos