Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter of a Mazda Bongo Brawny

Model: Mazda Bongo Brawny - Years 1995-2005
Part: Engine oil

Let's see how to perform routine maintenance by replacing the engine oil and oil filter on a Mazda Bongo Brawny. First, lift the vehicle and start unscrewing the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes. Next, unscrew the oil filter using the appropriate wrench, as shown in the video. At this point, screw on and gently tighten the new oil filter; then unscrew the fill cap and top off by pouring in the appropriate oil for your engine!

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Change the Engine Oil and Oil Filter on the Mazda Bongo Brawny
Change the Engine Oil and Oil Filter on the Mazda Bongo Brawny
Mazda Bongo Brawny (1995-2005 / ) This short and simple guide will show you how to perform routine maintenance by changing the engine oil and oil filter on the Mazda Bongo Brawny. Fir…
How to Change the Oil in a Mazda Bongo Brawny?
How to Change the Oil in a Mazda Bongo Brawny?
Mazda Bongo Brawny (2019-2026 / MK 5) To replace the engine oil in the Mazda Bongo Brawny, gather new engine oil, a drain pan for collecting fluids, a funnel, and the appropriate tools to…
How to Replace the Rear Brake Pads of the Mazda Bongo Brawny
How to Replace the Rear Brake Pads of the Mazda Bongo Brawny
Mazda Bongo Brawny (1995-2005 / ) In today's tutorial, we will see how to remove and replace the rear brake pads of the Mazda Bongo Brawny by following these simple steps. First, lift…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos