Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mazda
  4. :
  5. Cx7
  6. : Where are the lambda sensors located in the Mazda CX-7?

Mazda Cx7 - Video tutorial

Model: Mazda Cx7 MK 1 - Years 2006-2012
Part: Lambda sensor
Operation: Where are the lambda sensors located in the Mazda CX-7?

In this video, we can see where the lambda probes are located in the Mazda CX-7 and how to proceed in case we need to replace them. These sensors are very important for the proper functioning of the engine. As shown, the first probe is located on the exhaust manifold, in the rear area of the engine, while the second one is positioned after the junction of the manifold itself to the single pipe. To remove both probes, it is sufficient to unscrew them using the indicated specific wrench, alternatively, we can use an equivalent-sized adjustable wrench. If they are difficult to unscrew, we can apply thread unlocking spray.


Posted on 30 July 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos