Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Cup Holder

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Center console tunnel

In the central tunnel of the car model in question, just near the handbrake lever, there is an integrated cup holder that can accommodate two bottles and/or two glasses. If you want to carry out a thorough cleaning of the interior, it is advisable to remove this holder to wash it properly (as should be done with the air vents). Start by disengaging the fastening clips around the edge of the holder, beginning from the side of the handbrake and then disengaging those on the driver's side, where more care is needed due to the thinner edge.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Cabin Air Filter
Replacing Cabin Air Filter
Mazda 3 (2003-2009 / BK, MK 1) The cabin air filter is located on the passenger side, behind the glove compartment that needs to be removed. Open the glove compartment door, unclip…
Remove the Door Panel (Left Rear) on a Mazda 3
Remove the Door Panel (Left Rear) on a Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Remove the door panel (left rear) on a Mazda 3: disconnect the battery terminals located in the engine compartment, and using a screwdriver, unscrew …
Instructions for Removing the Front Wing
Instructions for Removing the Front Wing
Mazda 3 (2009-2013 / MK 2, BL) To remove the front wing, you must first detach the bumper and the front lights: start by opening the front bonnet and removing the push clips along …

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos