Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Recalibrate the Side Windows on a Mazda CX-9?

Model: Mazda Cx 9 TB - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Side window

See other generations:
Video tutorial

On the Mazda CX-9, one of the side windows may need recalibration, for example, after the battery has died. This is an extremely simple and quick operation; let's see how to proceed in this tutorial.

First, go inside the cabin, then turn on the ignition and close the window in question by holding the corresponding button, keeping it pressed for an additional 3 seconds. Once this is done, repeat the operation but open the window.

If the procedure has been performed correctly, the automatic function will be properly calibrated.


Updated on 11 August 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Windshield Wiper Blade on a Mazda CX-9
How to Replace the Rear Windshield Wiper Blade on a Mazda CX-9
Mazda Cx 9 (2016-2024 / TC) If you intend to replace the rear windshield wiper blade on this vehicle model, the following description includes the necessary references and steps…
How to replace the power window regulator in the Mazda CX-9?
How to replace the power window regulator in the Mazda CX-9?
Mazda Cx 9 (2007-2015 / TB) In this tutorial we can see how to replace the window regulator in the Mazda CX-9, a very simple operation. First of all, we open the door in which w…
How to Replace the Car Stereo on a Mazda CX-9?
How to Replace the Car Stereo on a Mazda CX-9?
Mazda Cx 9 (2007-2015 / TB) To replace the car stereo on a Mazda CX-9, pry at the sides of the center dashboard panel where the vertical trim pieces are located. These need to b…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos