Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the power window regulator in the Mazda CX-9?

Model: Mazda Cx 9 TB - Years 2007-2015
Part: Side window

In this tutorial we can see how to replace the window regulator in the Mazda CX-9, a very simple operation. First of all, we open the door in which we will work, then we remove the inner panel by removing the various covers and unscrewing all the fixing screws. We then remove the two indicated caps, lower the window until the respective bolts align with the holes, unscrew them and fix the window itself to the upper pillar using adhesive tape. At this point, all that remains is to disconnect the various cables, remove the speaker, dismantle the entire plastic frame and replace the window regulator. To reassemble everything, simply follow the reverse procedure.

Posted on 15 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on a Mazda CX-9
How to Replace the Fuel Pump on a Mazda CX-9
Mazda Cx 9 (2007-2015 / TB) In this brief guide, follow the instructions to remove and replace the fuel pump on a Mazda CX-9. First, open the left rear door of the vehicle and m…
How to Replace the License Plate Light Bulbs on a Mazda CX-9?
How to Replace the License Plate Light Bulbs on a Mazda CX-9?
Mazda Cx 9 (2007-2015 / TB) In this tutorial, you will see how to replace the license plate light bulbs on a Mazda CX-9, a very simple and quick operation. First, make sure the …
How to change the battery of the Mazda CX-9
How to change the battery of the Mazda CX-9
Mazda Cx 9 (2007-2015 / TB) Today we will see the instructions that will allow us to disassemble and replace the battery of the Mazda CX-9 engine, in simple and quick steps. Fir…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos