Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the speakers in the Mazda 3?

Model: Mazda 3 MK 3, BN, BM - Years 2013-2019
Part: Speaker

In this tutorial, we can see how to replace the speakers in the Mazda 3, an extremely simple and fast operation. First of all, make sure that the key is not inserted, so that you can work safely. Then, open the door, remove the cap inside the handle, and unscrew the two screws indicated. Next, unclip the window control panel using a plastic spatula, separate the panel from the door by levering along the bottom edge, and continue by removing the speaker. At this point, all that remains is to install the replacement, reassemble everything, and repeat the operation on the opposite side.

Posted on 22 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Removal of the Original Car Radio
Removal of the Original Car Radio
Mazda 3 (2009-2013 / MK 2, BL) Removing the factory car radio is important if you want to install a better, newer one or if the current one is malfunctioning. It is clipped in plac…
How to reset the oil light on the Mazda 3
How to reset the oil light on the Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) In the following guide dedicated to your Mazda 3, we will discover the steps you need to take in order to correctly reset the oil light on the car's …
How to replace the shift lever boot in the Mazda 3?
How to replace the shift lever boot in the Mazda 3?
Mazda 3 (2003-2009 / BK, MK 1) In this tutorial we can see how to replace the gear shift knob cover in the Mazda 3, a very simple and quick operation. First of all, go inside the c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos