Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore the inspection indicator on the Mazda 3.

Model: Mazda 3 MK 3, BM, BN - Years 2013-2019
Part: Checks and maintenance

In this short video tutorial, we are shown how to reset the maintenance light on our Mazda 3. The procedure is very simple and takes less than 1 minute to perform. To reset this light, we need to press and hold the button on the dashboard, while keeping it pressed, we start the instrument panel and wait for the maintenance light to stop flashing and disappear. This indicates that the reset is complete and we can release the button and start the car to verify that the procedure has been successful and that the light is no longer present on the dashboard.

Posted on 29 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to Replace a Headlamp Bulb on a Mazda 3
How to Replace a Headlamp Bulb on a Mazda 3
Mazda 3 (2003-2009 / MK 1, BK) Want to change the front headlamp bulbs on a Mazda 3 but don’t know how? Let’s go through the process. Open the bonnet by pulling the lever located a…
Mazda 3 indicator light replacement
Mazda 3 indicator light replacement
Mazda 3 (2009-2013 / MK 2, BL) Let's see how to disassemble the indicator light on a Mazda 3. We pry between the indicator light and the sheet metal of the car (without breaking th…
How to reset the oil light on a 2016 Mazda 3.
How to reset the oil light on a 2016 Mazda 3.
Mazda 3 (2013-2019 / MK 3, BM, BN) If you want to manually reset the oil indicator light on your 2016 Mazda 3, simply read the following guide carefully and then follow all the steps d…

How to Replace the Front Headlight Bulbs of a Toyota Rav4

Want to change the front headlight bulbs of a Toyota Rav4 and don't know how? Follow these steps. Open the bonnet and secure it. Locate the inspection caps at the back of the headlights and remove them. At this point, you will find the bulbs with metal clips. Pull the bulb holder out of the headlight and extract the damaged bulb. Fit the new bulb (ensuring it is the correct type and size) and insert the bulb holder back into the headlight housing. Finally, close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos