Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Exterior Mirror Cap on a Mazda CX-9?

Model: Mazda Cx 9 TB - Years 2007-2015
Part: Side mirror

In this tutorial, you will see how to remove the exterior mirror cap on a Mazda CX-9, a very simple and quick operation. First, rotate the mirror inward, then pry along the outer slot and separate it from the mount. Next, disconnect the small connector, unlock the three clips indicated using flathead screwdrivers, and by prying along the entire perimeter, separate the cap from the mirror. To install the replacement, simply position it and press firmly until it is fully secured.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to repair the mirrors of the Mazda CX-9 that were stuck
How to repair the mirrors of the Mazda CX-9 that were stuck
Mazda Cx 9 (2016-2024 / TC) In this video we see a problem regarding the external rearview mirrors of the Mazda CX-9. The youtuber has the issue that the side mirrors sometimes …
Where to Find the Main Fuse Box on the 2017 Mazda CX-9
Where to Find the Main Fuse Box on the 2017 Mazda CX-9
Mazda Cx 9 (2016-2024 / TC) If you want to find out where the main fuse box is located on your 2017 Mazda CX-9, just read the following guide carefully. Before proceeding, remem…
How to Change the Air Filter on the Mazda CX-9
How to Change the Air Filter on the Mazda CX-9
Mazda Cx 9 (2016-2024 / TC) If you need to replace the air filter on this vehicle model, you can identify the various steps to follow in the description below and in the video. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos