Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Console in a Mazda MX-5?

Model: Mazda Mx 5 NC, MK 3 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will learn how to remove the centre console in a Mazda MX-5, a very simple and quick operation. First, go inside the cabin, then using a flat screwdriver or preferably a plastic spatula, unclip the panel located at the rear of the tunnel.

Next, unscrew the three screws indicated with a cross-head screwdriver, open the small glove compartment, and unscrew the additional fastening screw. Finally, remove the gear knob, grasp the console from both sides, and separate it from the floor.


Updated on 25 August 2026 by ScegliAuto


Related tutorials

Aftermarket Car Radio Installation
Aftermarket Car Radio Installation
Mazda Mx 5 (2005-2015 / NC, MK 3) To install a new aftermarket car radio, you must first remove the factory radio. Start by removing the plastic cover of the reinforcement plate locat…
Instructions for Dismantling the Car Radio
Instructions for Dismantling the Car Radio
Mazda Mx 5 (2005-2015 / NC, MK 3) The first operation to perform is to remove the plastic trims around the car radio and the climate control buttons: start by removing the plastic tri…
How to remove the driver's seat in the Mazda MX-5?
How to remove the driver's seat in the Mazda MX-5?
Mazda Mx 5 (2005-2015 / NC, MK 3) In this tutorial we can see how to disassemble the passenger seat in the Mazda MX-5, an extremely simple and quick operation. First of all, make sure…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos