Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Information on the TPMS Indicators of the Mazda 3

Model: Mazda 3 MK 4, BP - Years 2019-2026
Part: Tire pressure warning light

In this video, learn about the operation of the TPMS indicators on the Mazda 3, and consequently about the maintenance of your vehicle's tyres. Tyres must always be kept at the correct pressure for safety, proper tyre wear, and better fuel efficiency. To achieve this, always maintain the tyres at the pressure recommended by the manufacturer, as indicated on the label. The TPMS system alerts you with a warning light and an audible signal when a tyre is deflated; if the light flashes, it indicates a malfunction in the system. When tyres are rotated or replaced, the system must be initialised. On some versions, it is possible to set a tyre maintenance schedule by selecting "applications" and then "maintenance".

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on the MAZDA 3
How to reset the TPMS light on the MAZDA 3
Mazda 3 (2013-2019 / MK 3, BN, BM) When the TPMS light comes on in the MAZDA 3, it is necessary to proceed with checking the pressure of all four tires. After adjusting the pressure if…
How to reset the tire pressure warning light on the Mazda 3
How to reset the tire pressure warning light on the Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) The tire pressure warning light indicates a possible loss of pressure or puncture in one or more tires; let's see how to reset the TPMS sensors on th…
Resetting the tire pressure warning light on the Mazda 3
Resetting the tire pressure warning light on the Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) Let's see the useful information on how to reset the tire pressure warning on the Mazda 3; before performing the reset, it is necessary that all four…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos