Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to top up the coolant in a Mazda 3?

Model: Mazda 3 MK 3, BN, BM - Years 2013-2019
Part: Antifreeze coolant

In this tutorial we can see how to check and top up the coolant in the Mazda 3, an extremely simple and quick operation to be carried out periodically. First of all, make sure that the engine is completely cold, so that you can work in complete safety, then open the hood and locate the expansion tank located right in front of the engine. Next, check that the liquid is between the two indicators on the back of the tank itself and, if not, add the necessary amount of coolant through the appropriate hole.

Posted on 2 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Engine Coolant Replacement
Engine Coolant Replacement
Mazda 3 (2003-2009 / BK, MK 1) Lift the vehicle and secure it. Before proceeding, open the radiator cap. Remove the plastic cap located under the radiator using the special tool, t…
How to Replace the Coolant Temperature Sensor in a Mazda 3?
How to Replace the Coolant Temperature Sensor in a Mazda 3?
Mazda 3 (2003-2009 / BK, MK 1) Replacing the coolant temperature sensor in a Mazda 3, as shown in this tutorial, is an extremely simple and quick task. Before proceeding, wait for …
Removing the Radiator on Mazda 3
Removing the Radiator on Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Lift the vehicle and start working from underneath by removing the clips and screws that secure the splash guard panel under the engine bay. Once thi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos