Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open a Stuck Fuel Filler Door on a Mazda CX-5?

Model: Mazda CX-5 MK 1, KE - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuel cap

See other generations:
Video tutorial

In a Mazda CX-5, the fuel filler door may get stuck, possibly due to a fault with the release mechanism or the lock actuator. In either case, you can perform an emergency opening by following the simple procedure shown in this tutorial.

First, open the boot, then remove the panel on the left side wall using a flathead screwdriver. Next, locate the mechanism cable, pull it towards you to unlock the door.

At this point, you can refuel and repair the faulty component.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to manually open the trunk of the Mazda CX-5.
How to manually open the trunk of the Mazda CX-5.
Mazda CX-5 (2017-2024 / MK 2) In this video, we will see how to manually open the rear hatch of a Mazda CX-5 in case the car battery or the remote battery is dead. In this case, t…
How to open the fuel flap on the Mazda CX-5?
How to open the fuel flap on the Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) This tutorial shows how to open the fuel flap on the Mazda CX-5, a very simple operation that follows the typical procedure for most vehicles. First,…
How to Replace the Key Battery of the Mazda CX-5
How to Replace the Key Battery of the Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) In this mini guide, discover how to replace the battery of your Mazda CX-5 MK1 key (2012-2017). First, press the small button on the back cover while…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos