Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the fuel flap on the Mazda CX-5?

Model: Mazda CX-5 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Fuel cap

See other generations:
Video tutorial

This tutorial shows how to open the fuel flap on the Mazda CX-5, a very simple operation that follows the typical procedure for most vehicles. First, unlock the doors using the remote control button, then open the driver's door, locate the fuel flap release lever on the lower left side of the dashboard, and activate it. Next, move outside the vehicle, fully open the fuel flap, and unscrew the cap. Once refuelling is complete, gently close the flap.


Updated on 19 October 2026 by ScegliAuto


Related tutorials

How to Open a Stuck Fuel Filler Door on a Mazda CX-5?
How to Open a Stuck Fuel Filler Door on a Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) In a Mazda CX-5, the fuel filler door may get stuck, possibly due to a fault with the release mechanism or the lock actuator. In either case, you can…
How to Replace the Fuel Pump on the Mazda CX-5
How to Replace the Fuel Pump on the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) In this guide, we will see the step-by-step instructions to remove and replace the fuel pump on the Mazda CX-5. First, open the rear doors and start …
How to Remove the AdBlue Warning Light in a Mazda CX-5?
How to Remove the AdBlue Warning Light in a Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) If the AdBlue warning light has illuminated in your Mazda CX-5, it means that the coolant level is too low and needs to be topped up. This is an extr…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos