Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on the Mazda CX-5

Model: Mazda CX-5 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Fuel pump

See other generations:
Video tutorial

In this guide, we will see the step-by-step instructions to remove and replace the fuel pump on the Mazda CX-5. First, open the rear doors and start by removing the rear seat; then unscrew the fixing screws of the cover to access the float, as shown in the video.

At this point, disconnect the fuel supply lines and the electrical connector of the fuel level sensor; then unscrew the pump collar to remove it from the tank, replacing it with the new original one and reassembling everything!


Updated on 12 September 2026 by ScegliAuto


Related tutorials

How do you replace the fuel filter of the Mazda CX-5?
How do you replace the fuel filter of the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) In order to replace the fuel filter of the Mazda CX-5, you must loosen the screws that secure the rear seat of the car, so that it can be completely …
Replacing the Diesel Filter on the Mazda CX-5
Replacing the Diesel Filter on the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) This guide shows you how to remove and replace the diesel filter on the Mazda CX-5, following the instructions below. First, open the bonnet and loca…
How to open the fuel flap on the Mazda CX-5?
How to open the fuel flap on the Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) This tutorial shows how to open the fuel flap on the Mazda CX-5, a very simple operation that follows the typical procedure for most vehicles. First,…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos