Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Wing Mirror on the Mazda CX-5

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Side mirror

Briefly, here are the steps to remove and replace the external wing mirror on the Mazda CX-5, following these simple steps. First, open the front door and start by removing the door panel; to do this, pry off the sides, disconnecting the electric connector for the window switch and the handle cable, as shown in the video. At this point, unscrew the fixing screws for the wing mirror, also removing the side glass; remove the window mechanism to slide the mirror out from the outside, replacing it with the new one!

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Wing Mirror on a Mazda CX-5
How to Replace the External Wing Mirror on a Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) To replace the external wing mirror on a Mazda CX-5, first remove the inner door panel. This can be done after loosening the screws around the intern…
How to remove the external rearview mirror in the Mazda CX-5?
How to remove the external rearview mirror in the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) In this tutorial we can see how to replace the external rearview mirror in the Mazda CX-5, an extremely simple and quick operation. First of all, we …
How to repair malfunctions of the electric exterior mirror of the Mazda CX-5?
How to repair malfunctions of the electric exterior mirror of the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) It is not always the case that anomalies require professional intervention or even replacement of the part, in this case, the exterior mirror of the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos