Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. CX-5
    4. : How do you deactivate the i-Stop system of the Mazda CX-5?

Mazda CX-5 - Video tutorial

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Checks and maintenance
Operation: How do you deactivate the i-Stop system of the Mazda CX-5?

In order to deactivate the i-Stop system of the Mazda CX-5, you need to connect a diagnostic tool to the OBD port of the vehicle: this port is located at the bottom of the dashboard, directly below the steering column. Once the scanner is connected, you will need to select the model of the car and its corresponding version: now you will need to follow the instructions provided in the tutorial to deactivate the i-Stop system. After deactivation, you can disconnect the scanner to verify that everything is functioning properly.


Posted on 17 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Cx 5 2012-2017 - What are the indicators of the Mazda CX-5? Read Answer
    • Cx 5 2012-2017 - What problems does the Mazda CX-5 bluetooth connection have? Read Answer
    • Cx 5 2012-2017 - What are the warning lights of the Mazda CX-5? Read Answer
    • Cx 5 2017-2023 - What are the warning lights of the Mazda CX-5? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos