Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Reinstall the Washer Fluid Reservoir

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Windshield washer nozzle

See other generations:
Video tutorial

Removing and reinstalling the washer fluid reservoir is a complex operation that requires patience and commitment. First, before proceeding, it is very important to disconnect the negative cable and set it aside.

Next, you will need to remove the bumper, disconnecting all cables connecting it to the vehicle. At this point, you will face the reservoir, from which you will disconnect all cables linking it to the bumper.

Then, empty it of all fluid and remove it. To install a new one, follow the exact reverse of the procedure.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

Replace the Fuel Pump on Mazda 6
Replace the Fuel Pump on Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Removing the fuel pump on a Mazda 6? Remove the fuel pump if damaged from inside the tank. First, lift the car with a column lift and remove the fuel…
How to Remove the Bonnet of a Mazda 6
How to Remove the Bonnet of a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Do you want to remove and replace the front bonnet but don't know how? Let's see how to open and remove the bonnet of your Mazda 6. Pull the lever lo…
How to Remove and Reinstall the Rear Wheel Support Plates
How to Remove and Reinstall the Rear Wheel Support Plates
Mazda 6 (2002-2008 / GG, MK 1) To remove and reinstall the rear wheel support plates, first lift the car on a ramp. Then, using a 12 mm socket, unscrew the bolts securing the wheel…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos