Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Fuel Pump on Mazda 6

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Fuel pump

See other generations:
Video tutorial

Removing the fuel pump on a Mazda 6? Remove the fuel pump if damaged from inside the tank. First, lift the car with a column lift and remove the fuel tank from under the vehicle.

Once the tank is removed, use a socket wrench to unscrew the securing bolts of the cover cap; take it out of its seat. Disconnect the power connectors and the liquid circulation hoses.

Extract the fuel pump from its seat along with the attached parts. Install a new fuel pump in the tank, screw in the bolts, and connect all the circulation hoses.

Secure the tank under the vehicle's floor.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to remove the fuel filter on a Mazda 6.
How to remove the fuel filter on a Mazda 6.
Mazda 6 (2008-2012 / MK 2, GH) In this video, we will see how to remove the fuel pump filter on a Mazda 6: this filter is located under the back seat, behind the driver (left-hand …
How to Replace the Fuel Filter on a Mazda 6
How to Replace the Fuel Filter on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Before you can start, open the front bonnet of your Mazda 6. The fuel filter is located in the bottom left corner of the engine bay. Begin by disconn…
Removal and replacement of the water pump on a Mazda 6
Removal and replacement of the water pump on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) In this video, we will see how to replace the water pump of a 2007 Mazda 6 (6 cylinders). We remove the engine cover, remove the air filter, disconne…

Other guides you may be interested in

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos