Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the fuel filter on a Mazda 6.

Model: Mazda 6 GH, MK 2 - Years 2008-2012
Part: Fuel filter

In this video, we will see how to remove the fuel pump filter on a Mazda 6: this filter is located under the back seat, behind the driver (left-hand drive); once we lift the seat, we need to unscrew the four screws that secure the cover; we give it a good clean with a blast of compressed air and then remove the electrical connector, then we take the pump out of the well and bring it to the workbench, where we will disassemble the filter, which we will have obtained in the meantime, for example from Fruugo. The code is 329896064-728160263 at the price of 6.95 euros for 2 pieces + 10.99 euros for shipping costs. We reassemble the filter and then put the pump back in its housing and reconnect the electrical connector; we close the cap and then put the seat back in place.

Posted on 2 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter on a Mazda 6
How to Replace the Fuel Filter on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Before you can start, open the front bonnet of your Mazda 6. The fuel filter is located in the bottom left corner of the engine bay. Begin by disconn…
Replace the Fuel Pump on Mazda 6
Replace the Fuel Pump on Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Removing the fuel pump on a Mazda 6? Remove the fuel pump if damaged from inside the tank. First, lift the car with a column lift and remove the fuel…
How to Replace the Pollen Filter on a Mazda 6
How to Replace the Pollen Filter on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) In this video tutorial, you can see how to replace the pollen filter on a Mazda 6 by following a few simple steps. First, purchase a new pollen filte…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos