Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure monitoring system on Mazda CX-5

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part:

Check the pressure: Make sure that the tire pressure is at the recommended level, which you can find on the label located on the door pillar. Dashboard ignition: Insert the key and turn on the car's dashboard without starting the engine. SET button: Find the button with the tire pressure symbol and the word SET, which is usually located to the left of the steering wheel. Resetting the warning light: Hold down the SET button for a few seconds until the tire pressure warning light starts flashing and then turns off. Verification: Turn off the dashboard and turn it back on to make sure that the tire pressure warning light has been reset correctly.

Posted on 5 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?
How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) Follow these steps to reset the low tyre pressure warning light on your vehicle: First, check the pressure of all four tyres and, if necessary, resto…
How to Reset the Tyre Warning Light on a Mazda CX-5
How to Reset the Tyre Warning Light on a Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) To completely reset the tyre pressure warning light on your Mazda CX-5, the procedure is very simple and quick. Using the car's screen, access the se…
How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?
How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) When a tyre (or more than one) has a pressure that is too low compared to the standard, whether due to a puncture or simply being deflated, the tyre …

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos