|
Do it yourself
| |||
| ||||
Resetting the Service Light on the Mercedes C-Class
Model: Mercedes Classe C
W203
- Years:
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Video tutorial
After performing the maintenance service on the Mercedes C-Class, proceed to reset the system that alerts you to the need for service with a warning on the instrument panel. Sit in the driver's seat, turn the ignition key to position two, and using the menu button on the left side of the steering wheel, select the mileage screen on the central display. Use the arrow buttons to navigate to the maintenance interval. Press and hold the button to the left of the tachometer until the reset request appears, then release and press again for three seconds to complete the operation.
Updated on 19 October 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2021-2026 /
W206)
.. oil change maintenance on the Mercedes-Benz C-Class, as well as the S-Class. First, get in the vehicle and turn on the instrument cluster; then use.. …
Mercedes Classe C
(2007-2013 /
W204)
..ow to reset the light on the Mercedes C-Class. First, get in the vehicle and turn on the ignition. Next, press the settings button and navigate t.. …
Mercedes Classe C
(2000-2007 /
W203)
.. to reset the service indicator on the Mercedes C-Class in simple steps. First, get inside the vehicle and turn on the ignition; press the button located.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to adjust the headlights in the Toyota RAV4?
In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.086
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |