Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning light on the Mercedes E-Class

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Tire pressure warning light

Today's steps will show us how to reset the tire pressure monitoring system (TPMS) light on a Mercedes E-Class; before performing the reset, it is necessary for all four tires to be at the correct pressure. First, we get into the car and start the dashboard; then, using the steering wheel controls, we navigate to the settings menu until we reach the tire pressure option, confirming the TPMS reset, as shown in the video. Now we start the engine and verify that the tire pressure light has been successfully reset!

Posted on 12 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Mercedes E-Class
How to Reset the Service Light on the Mercedes E-Class
Mercedes Classe E (2016-2023 / W213) .. maintenance (service) light on the Mercedes E-Class. First, get in the vehicle and turn on the ignition; then go to the vehicle settings, select "workshop,".. …
How to Remove the Rear Seat Bench of a Mercedes E-Class
How to Remove the Rear Seat Bench of a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. start, open the rear doors of your Mercedes E-Class. Begin by prying off and removing the rear cup holder cover, then detach it by unscrewing the mounting.. …
How to reset the tire pressure warning light on the Mercedes E-Class
How to reset the tire pressure warning light on the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. the tire pressure warning of the Mercedes E-Class; before performing the TPMS sensor reset, it is necessary that all four tires are at the operating.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos