Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front headlamp of the Mercedes B-Class

Model: Mercedes Classe B MK 2, W246 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
Video tutorial

The steps outlined in this guide will show you the procedure for removing and replacing the front headlamp and its bulbs on the Mercedes B-Class. First, open the bonnet of the vehicle and start unscrewing all the fixing screws of the front bumper, located above and below the bumper; unscrew the additional screws found on both sides of the front wheel arches, as shown in the video.

At this point, gently detach the bumper from the sides, then unscrew all the screws of the headlamp unit; disconnect the electrical connector to replace the headlamp with the new one!


Updated on 26 October 2026 by ScegliAuto


Related tutorials

Removing the Rear Light and Bulbs on the Mercedes-Benz B-Class
Removing the Rear Light and Bulbs on the Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. rear light and its bulbs on the Mercedes-Benz B-Class. First, open the boot lid and start by removing the cover found on the side, accessing the screws.. …
How to replace the front fog light bulb of the Mercedes B-Class
How to replace the front fog light bulb of the Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. replace the front fog light bulb of the Mercedes Classe B. First of all, let's move to the front part of the car and start by removing the plastic cover.. …
How to remove the windscreen from the Mercedes Class B?
How to remove the windscreen from the Mercedes Class B?
Mercedes Classe B (2011-2019 / MK 2, W246) .. To remove the windscreen from the Mercedes Class B, you need to disassemble all the components covering its perimeter: start by detaching the longitudinal.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos